Archive for 2016

Home Archive for 2016

FINAL PRESENTATION

For my final presentation we are ask to design our presentation board. Our lecturer given us a few choices to arrange our presentation board. For me, to make it easier I decide to use 2 A1 for my presentation board.

So this this is my presentation board. In this presentation board, I have put in the storyboard, the process of transformation, anthropometric. And I also put in my model plan which I learn from design communication such as roof plan, floor plan, section, elevation, perspective and oblique.

MODEL 5

Finally, we begin our model 5. For model 5 we need to create more opening space for what our superhero can do inside. This model is the hardest model among all of the model. At first I was struggling because my model is quite small and to be honest I was not really satisfied for my model so I decided to make a new one. For more information, we need to use the wire to create our context to put our model in.

45 degree angle

Front view

Side view

MODEL 4

For our model four, we are given some context such as hanging, parasite, sunken and other more.
For my context, I decide to choose parasite. What inspired me to choose parasite which is the spider web because the spider web is hanging between the tree. Other than that, w also ask to create an opening space for our fourth model.

INSPIRATION

MODEL 4

Side view

Front view

MODEL TRANSFORMATION 2 and 3

After we done our model one, we are ask to transform model 2 from model 1. So for my model 2, I decide to create the curvy line for organic shape and to show the rhythm of centralise.

Front view

Side view

After finish model 2, we need start our model 3. This assignment is slowly getting harder and start burning midnight oil. My face also slowly start turning into zombie. So for my model 3, I decided to turn my model 3 more geometric shape, look more dynamic and look it more edgy. My lecturer also thought us about subtraction and addition. So from this idea, I subtract my end of the model and add the geometric shape in. Other than that, my model also more on face to face.

Front view

Side view

MODEL TRANSFORMATION 1

OK! Now is our model time and is also our hardest part for this subject. So from the abstract art, we are asked to create a model model using boxes which related to the abstract art. At first I was struggling bcs i have 0 idea for the transformation until my lecturer gave me an idea of golden ratio.

MODEL 1

This is what I did for my model 1

Front view

Side view

ABSTRACT ART

After we finish our mascot, we have to start build our model. Before we allowed to create our model, we are asked to create an abstract art from the keyword that we choose from the insect. For my keyword which is venomous, agile and no mercy.

SUPERHERO

BROWN RECLUSE SPIDER

After our first presentation, we are asked to choose one type of insect which u are in that insect group. Lets say I'm from spider group, so I have to choose one type of spider. So I decided to choose Brown Recluse spider. What i like form this spider which is the fierceness of the spider and it is the most venomous spider in the world.

My Superhero - SIDAE

After we chose the insect that we want, we are asked to create our own superhero from the insect. The superhero that i create look something like this.

Background story

Tim is a troubled boy who grew from a dysfunctional family, where his problems manifests itself into a road of mischievous doings. When he grew up, his dark past led him to become one of the robbers of a high profilic jewellery store. He was caught, arrested and thrown into prison. Six years later, Tim is now a changed man, where he decides to start a new chapter in life, bringing contributions to society. Upon his release he stumbled upon his old enemies attacking a poor innocent man. Tim acted fast, but was quickly subdued by his enemies. Tim was furious, as he couldn’t protect himself, whatmore of others. Humiliated, he looked into the trash where he found a mask, and suddenly a spider appeared. Petrified, he pulled away, yet it was too late as the insect had bitten him of fear. Days later, he discovered his newfound powers where he vowed to use it to help others by being the vigilante he is today, as SIDAE.

MASCOT

After that we are given the mascot template to make our own mascot that we design.

DOUBLE STORY RESEARCH

For this assignment, we are choose to do in group to study a double story house. We are ask to do research about opening and wall, ceiling, stairs, flooring and relationship between beams and columns. For my part, I’ll do research about relationship between beams and columns.

The basic difference thing between them which is they both are same material wise. If keep it horizontal it is call beam. Beam carries the load by bending also called flexure. If keep it vertically forms a columns it carries load by undergoing compression.

COLUMNS

In building structures, columns are build on different footings to transfer the load of the building to the footings of the building. There are two type of columns which is slender columns and short columns. The column is said to be slender, if the cross sectional dimensions are small compared to its length. When the condition of the columns is opposite to that slender columns, the columns are classified as short columns and short columns normally use more then slender columns.

BEAMS

In the structure, beam columns is used to carry the loads from the slabs to the columns. The concrete beam can be classified as T beams, L beams and rectangular beams. For more information, there are I section, L section and U section in the steel bar. Beams are normally designed for bending moments and sheer stress. Due to the loading, the vertical reinforcement is used to prevent the shear stresses when transverse reinforcement is used to prevent the bending moments.

RELATIONSHIP BETWEEN COLUMNS AND BEAM

For the relationship between columns and beam, they are load carrying elements but differ in the method or the way of handling the load by each member. The columns bear the compression of the load where the beams bear the bending moment and the shear force of the load. They both have the similar material to used in contraction which is steel, timber and concrete. A building can't stand without columns but building can stand without beam. The columns are classified as two type which is slender and snort while beams classified three type which isT,L or rectangular.

After perspective drawing, we start to learn how to draw orthographic projection which is we need to draw the top view, side view and front view of the object. This exercise is important because we need to master this exercise before we start to draw floor plan. During our class we are given an exercise.

After the exercise, we are given the same assignment but this one way more complicated because of the curve line.

After we finish our one point and two point perspective furniture drawing, we finally start to learn what interior designer need to learn. We start to learn one and two point projection which is drawing and interior space with one and two point perspective. We are asked to find one point and two point interior space for our assignment.

This is my two point perspective of a bathroom. It was complicated at first drawing on this because of the line and confusing.

After our conturing and hatching assignment, we are ask to choose two type of furniture and draw one point and two point perspective. The furniture that i choose which is a plastic chair and a sofa. I choose plastic chair for my one point perspective and two point for sofa.

On top the picture which is my two point perspective drawing. At first when I draw it was complicated for me but after a few drawing it started better.

For our first assignment of Design Communication, we are ask to buy one capsicum and ladyfinger for this conturing and hatching assignment. After we did a few exercise, the lecturer ask us to draw three different angle of capsicum.

After the conturing drawing, we also asked to draw 4 capsicum and ladyfinger with different type of technique which is hatching, cross hatching, stippling and scribbling.

The Arch

Is been a long time I touch my computer, evermore so blogging. Yet here I am again. It is the beginning of the semester and even now theres a flood amount of work. Ms Sharon our construction and technology lecturer release a new assignment which was the Arch. The purpose of this assignment is to build an arch that function just as well as it looks.

We began by planning a design which believe me is a lot harder than it loosks. People think its just a a clay but what made it difficult was that we had to support it as how it would have been done in the olden days. This is the process that we make the arch by using the plasticine.

First we roll the plasticine for the leg of the arch. For the requirement each arch leg we made it to to the height of 3 inches. We then cut it into square making it into blocks where we would later stack it up forming the pillars. To end and connect to each side of the pillars, we made a keystone which acts as the centre piece.

This the endow the result of the arch that we build.

In the end, the test that Ms Sharon perform showed that our arch held its require load. However we were hoping that it would support a larger amount of the item that we put on. At last, we manage to put 7 handphone on top of it.

Extreme Poses

After half a year of break, it is time to get back to the stress life. I was expecting the lecturer to at least let us off easy for the first week considering most of us are new, but damn was I was wrong. First day of class and we received assignment 1 whereby we had to study the human positions in different yet common activities. It is after a couple of trys that I realised how out of practice I am. Here's the result of my work.

What do you think?

Welcome to part 2. MS.Sharmila decided to surprise us with something special. Behold, PART 2! From the 12, we were asked to choose 3 activities and this is what I came up with. From the picture below, all the images are in the scale of 1:20.

Jumping over the fence. I wanted to pick an item that would show my body's full movement. And as you can see, i have tried different styles to maximize the pose.

Sitting using the laptop. I chose a rather simple position that I'm sure everyone can familiarize with. Here I am at home sitting on a platform. And so I experimented on poses that restless individuals would take in.

And lastly, the last activity for this assignment is reaching for the book. This pose is one that I feel many take for granted. Something simple but yet for me to put in sketch form was a little problematic.

CTX Final Project- Sekinchan Road Trip

This is the final submission for the CTX project.

https://www.youtube.com/watch?v=jVPC97o1xqQ

CTX Vlog

Vlog for the CTX project which is Sekinchan road trip.

https://www.youtube.com/watch?v=tD15_TdsWHk

Progress of editing the sekinchan road trip video

The struggling of editing video which is the cutting part and add the music into this video because we need to put the music at the right time.

Final project (Monogram)

For this last, project student have to sketch multiple logo. Then pick the best design we like the most.

This is the logo that I decided to choose for my monogram project .

These are the five item that I put my logo on it.

Disposable slipper

Small bag

Cup and Plate

T-shirt

Finally, we ask to design a poster by using the logo that we chosen for this project.

Poster

Sketchbook (Marbling)

This is one of my design.

While I was putting the ink in the water, my lecturer saw this interesting texture and decide ask me to take picture of it.

Paint to Music

For this assignment, we have to paint to music and there is two type of genre which is contemporary and classical .

Classical

Contemporary

Assignment 3- Material Exploration

For this assignment, we have two choose two design from the black square assessment and create an artwork by using collage method. For this assignment we are allow to use any material.

For my assignment i decided to use foam board for my artwork.

Subscribe to: Posts ( Atom )

Pages

Jia Cheng

Navigation Menu

FINAL PRESENTATION

MODEL 5

MODEL 4

MODEL TRANSFORMATION 2 and 3

MODEL TRANSFORMATION 1

ABSTRACT ART

SUPERHERO

Extreme Poses

CTX Final Project- Sekinchan Road Trip

CTX Vlog

Progress of editing the sekinchan road trip video

Final project (Monogram)

Sketchbook (Marbling)

Paint to Music

Assignment 3- Material Exploration